Shanghai Second Forging Punch J23 Series

Time：2020-03-23 09:03:19CTR：

Performance characteristics:
J23 series open type tilting presses are general-purpose presses, suitable for various cold stamping processes such as forming, blanking, punching, bending, etc., and are widely used in electronic components, instruments, meters, motors, appliances, toys, automobiles, tractors And other industries.

Technical parameter		Unit	Model
			J23-6.3	J23-10	J23-16	J23-25	J23-40	J23-63	JB23-63	J23-80	J23-100	J23-125
Nominal pressure of slider		KN	63	100	160	250	400	630	630	800	1000	1250
Slider stroke		mm	35	45	55	65	90	110	110	120	140	150
Number of trips	fast	times/	170	145	120
Number of trips	Low speed	min				55	45	50	40	38	38	35
Closed height		mm	150	180	220	270	320	360	390	440	480	500
Closed height adjustment		mm	30	35	45	55	65	80	80	90	100	100
Distance from slider center line to machine		mm	110	130	160	220	250	260	310	350	380	390
Slider bottom surface size	L×R	mm	140	170	200	250	300	300	400	430	540	540
	L×R
	F×B	mm	120	150	180	220	220	260	360	360	480	480
	F×B
Die handle hole size	diameter	mm	30	30	40	40	50	50	50	60	60	60
Die handle hole size	depth	mm	55	55	60	60	70	70	70	75	75	75
working desk size	L×R	mm	310	370	450	560	700	760	860	950	1080	1100
	L×R
	F×B	mm	200	240	300	370	460	480	570	650	710	720
	F×B
Workbench thickness		mm	30	35	40	50	65	90	80	100	120	130
Maximum tilt angle			45	35	35	30	30	30	20	20	15	13


Distance between the table and the ground		mm	750	730	750	800	850	810	850	850	850	860
Dimensions	F×B	mm	780	900	1150	1345	1721	1810	1958	2060	2254	2200
	F×B
	左右	mm	620	665	847	950	1335	1350	1500	1715	1790	1790
	L×R
	高 H	mm	1503	1658	1910	2130	2488	2740	2868	3290	3625	3590
Anchor bolt distance	F×B	mm	530	610	780	920	1060	1180	1300	1360	1550	1710
	F×B
	左右	mm	314	394	450	600	750	850	920	1010	1130	1110
	L×R
Motor Power		KW	0.75	1.1	1.5	2.2	5.5	5.5	7.5	7.5	11	11
Total		KG	420	595	1095	1830	3600

I want to place the order.

Name
TEL
Message
Code

previous：没有了

next：没有了

Back