Wan Datong TSG-350 precision grinding machine

Time：2020-03-23 09:03:53CTR：

Information description:
Features of Taiwan Datong Precision Manual Grinder:
1. The distance from the work surface to the center of the grinding wheel shaft is 385 mm, and large fixtures and dressers can be used.
2. The saddle slide rails are V-shaped and flat-shaped, with Teflon wear-resistant sheets attached to make the table move quickly and ensure its accuracy.
3. The electromagnetic pump is used to control the continuous circulation of lubricating oil, lubricating all the slide rails, the upper and lower front and rear screws.
4. The column adopts H-shaped structure, with high strength, wide-span slide rail, and no vibration of the main shaft to ensure the accuracy of the finished product.
5. The spindle uses ultra-precision (P4) ball bearings, the shaft end deflection is less than 0.003mm, sealed grease lubrication, to ensure long-term life, spindle replacement is simple and easy. (Bullet type spindle: integrated design of grinding wheel spindle and motor)
6. The dust suction system is integrated with the machine (TSG-350), saving space and easy to remove chips.
7. Complete accessories, suitable for all kinds of grinding processing, give full play to the mechanical performance. The main castings such as base, saddle, workbench, and column are made of FC30 and FCD35 materials, which are high-strength and wear-resistant cast iron, with super-strength ribs inside, and forced tempering treatment to eliminate stress and prevent future deformation. Maintain mechanical precision. The main castings such as base, saddle, workbench, and column are made of FC30 and FCD35 materials, which are high-strength and wear-resistant cast iron, with super-strength ribs inside, and forced tempering treatment to eliminate stress and prevent future deformation. Maintain mechanical precision.
Model parameters of Datong grinder: TSG-350 / 450 TSG-3B
Specifications: Maximum grinding length: 365 / 470mm
Grinding maximum width: 150 / 160mm
Distance from grinding wheel axis to working table surface: 385 / 400mm
Grinding wheel size (outer diameter × thickness × aperture): 180 * 13 * 31.75
Wheel speed: 3600rpm
Grinding wheel motor: 0.75Kw2p
Vacuum motor: 0.4Kw2p

I want to place the order.

Name
TEL
Message
Code

previous：没有了

next：Supply Taiwan Fengbao FGM-618G precision manual surface grinder

Back