Tailifu TPR-1600 hydraulic rocker drilling machine
Time：2020-03-23 09:03:57CTR：
|
Tai Li Fu (Taiwan) TPR-1600mm series ---- 1600mm center position. Special oil circulation pump with built-in gear to cool the precision gear in the gear box can reduce excessive gear wear. The friction clutch can absorb the longitudinal impact force generated by the main shaft, so it can effectively protect all the transmission components in the gear box, and has a quick return function of the main shaft, which can speed up the tapping operation speed.
|
|
|
The swing arm lifting system is controlled by an electronic timer. When the button is activated, the swing arm can be automatically relaxed and lifted vertically, or the lift is stopped and automatically clamped. It is easy to operate and can maintain the original tool center position after tool change. Special oil circulation pump with built-in gear to cool the precision gear in the gear box can reduce excessive gear wear. The friction clutch can absorb the longitudinal impact force generated by the main shaft, so it can effectively protect all the transmission components in the gear box, and has a quick return function of the main shaft, which can speed up the tapping operation speed.
|
|
|
|
Maximum distance from the center of the spindle to the surface of the machine column TPR-C1250: 1250mm TPR-C1600: 1600mm TPR-1600H: 1575mm
The horizontal movement stroke of the spindle head on the cantilever TPR-C1250: 900mm TPR-C1600: 1250mm TPR-1600H: 1200mm
Maximum distance from the end of the spindle to the machining surface of the base TPR-C1250: 1220mm TPR-C1600: 1220mm TPR-1600H: 1650mm
The vertical lifting stroke of the swing arm on the machine column TPR-C1250: 880mm TPR-C1600: 880mm TPR-1600H: 900mm
|
|
|
|
|
|
The arm lifting mechanism is equipped with a safety device to prevent the arm from falling suddenly due to excessive wear of the lifting copper nut after many years. Built-in multiple limits, overload protection device, can take into account the safety of operation. The machine column, swing arm and gear box can be clamped individually or at the same time, and the selector switch can be used. (Applicable to TPR-C1250 / C1600)
|
|
|
|
|
|
Back
