Hot selling high precision centerless grinder JX-18S / 1810S
Time：2020-03-23 09:03:35CTR：
Guangdong Xiezhong Machine Tool Youhui promotes all kinds of machine tools. You are welcome to visit and purchase.
Technical parameters of JX-18S / 1810S high-precision centerless grinder:
| Standard workpiece tool holder (through grinding) ￠ 1.0 ～ ￠ 80mm | ||||
| Special workpiece tool holder (cutting and grinding) ￠ 5 ～ ￠ 150mm | ||||
| Grinding wheel ￠ 455 (outer diameter) X255 (width) X ￠ 228.6 (inner hole) Mm | ||||
| Adjustment wheel ￠ 255 (outer diameter) X255 (width) X ￠ 111.2 (inner hole) Mm | ||||
| Imported brands are used for grinding wheel shaft and guide wheel shaft | ||||
| All electrical appliances adopt Siemens and Fuji brand in Japan | ||||
| 1. Adjust wheel speed (stepless speed change) | 6-300R.P.M | |||
| 2. Wheel speed | 1260R.P.M | |||
| 3.Grinding wheel drive motor | 20HPX4P （15HPX4P） | |||
| 4.Hydraulic pump drive motor | 1HPX4P 0.75KW | |||
| 5.Adjustable wheel drive motor (servo motor control) | 2KW (3KW) | |||
| 6.Cooling pump drive motor | 1/4HPX2P 0.25kw | |||
| 7.Adjust the wheel tilt angle | +5°～ -5° | |||
| 8.Adjust wheel rotation angle | ±5° | |||
| 9.Total power of machine tool | 19kw | (15kw) | ||
| 10.The center of the two wheels is connected to the height of the bottom of the bracket | （...） | |||
| 11.Ovality Standard Specimen | 0.001mm | |||
| 12.Straightness Standard test piece | 0.001mm | |||
| 13.Standard specimen | 0.002um | |||
| 14.Packing size | 2200X1840X1530mm | |||
| 15.Packing weight | 3000kg | |||
| Standard accessories： | ||||
| Grinding wheels and flanges | ||||
| Adjusting wheel and adjusting wheel flange | ||||
| Through grinding knife holder and cutting knife holder | ||||
| Toolbox and tools | ||||
| Horizontal screws and washers | ||||
| Flange extractor | ||||
| Knife board | ||||
| Standard accessories for electrical box 1 group | ||||
| Oil tank (with oil temperature cooler) 1 group | ||||
| Standard cooling system (water tank) 1 group | ||||
| Diamond trowel 2 | ||||
| Special accessories | Iron filings separator | |||
| Structure description: | ||||
| The main frame is made of high-grade cast iron (FC30), the slide rail is designed with double A type, and is subjected to aging and tempering treatment. The grinding wheel spindle and adjustment wheel spindle are made of high-grade alloy steel and are precision-processed; after multiple treatments, the torque is strong and not Deformed. The spindle has high rigidity, suitable for heavy cutting and high precision grinding. The dressing device is made of special alloy cast iron, after stewing, wear-resistant; before and after dressing by hydraulic drive, the dressing seat of the adjusting wheel can be adjusted according to the required angle of the workpiece to ensure the accuracy of the workpiece cylinder. Each part has been manually scraped and precision-scraped to ensure long-term use without deformation and after quenching treatment. The upper and lower blades are fine-tuned at 0.001mm. The sliding surface of the machine is equipped with a centralized lubrication oil supply device to ensure the lubrication effect of the sliding surface. Feeding accuracy. | ||||
| The grinding wheel correction device is adjusted by 6 °, the workpiece and the adjustment wheel are precise and accurate, and meet various grinding requirements | ||||
| The most complete optional configuration, improve the operation manpower and convenience | ||||
| Each machine undergoes strict inspection and testing to ensure the best performance accuracy and low failure rate | ||||
With many years of production experience, Xiezhong Technology regards product quality as life, takes customer needs as its purpose, builds corporate image with integrity, and sincerely welcomes all business colleagues to visit and seek common development. Our company has a complete range of products to meet your one-stop shopping needs, we will serve you wholeheartedly.
next：没有了
Back