Regarding the general band sawing machine, because the pressure changes, the hydraulic oil temperature changes and the hysteresis of the solenoid valve and relay all affect the precision of sawing and feeding, the cutting accuracy is poor, and the consistency of batch cutting is also not good. In addition, when changing the cutting length of a general band saw machine, the operation is relatively cumbersome because of the need to adjust the feeding length scale.

Because of the difference between sawing data and saw blade performance, the optimal speed of saw blade and sawing speed can be actively adjusted in real time. For example, when the saw blade twists and turns to reach a certain threshold value of the system, the system reduces the speed to adapt or close the feed. This requires major changes in the foundation of the original general band sawing machine, such as: changing the original hydraulic unit, adding a saw blade twist monitor, etc. The grating ruler is installed on the original general sawing machine for azimuth measurement, and the original hydraulic system remains unchanged. Control system software security function design, including silo, storage material retrieval, saw classification management, saw blade twist monitoring, data compaction, saw blade speed, saw cutting feed speed adaptive control, etc. In order to be satisfied together without changing the requirements of the original hydraulic system, the system adds an orientation control module based on the general solenoid valve. Are you going to remodel your own band saw now? Trust must be simple.