Taiwan Jiande Surface Grinder KGS-618M

Time：2020-03-21 14:03:16CTR：

This grinding machine is professionally manufactured by Taiwan's machine tools with more than 50 years of machine tools, and is manufactured by Jiande Industrial Co., Ltd., a world-renowned brand KENT. The original factory directly supplies surface grinding machines.
The following isJiande surface grinderDetailed parameters of FGS-618M：

Project					Unit	KGS-618M
Ability	Workpiece table size (length x width)				mm	460x150
	Maximum movement of workpiece table	Left and right			mm	475
		Befpre and after			mm	185
	Maximum distance from worktable to spindle center				mm	380
	Worktable maximum weight				Kgs	120
Workbench and front-to-back feed	Workbench T-slot				mmxN	14x1
	Worktable speed				M/min	–
	Front and rear handwheel feed		One grid		mm	0.01
			One lap		mm	3
	Automatic feed rate before and after				mm	–
	Fast volume before and after		50 Hz		mm/min	–
			60 Hz		mm/min	–
上下进给	Up and down hand wheel feed		One grid		mm	0.005
			One lap		mm	1
	Automatic feed amount up and down				mm	–
	Rapid movement up and down				mm/min	–
Wheel spindle	Grinding wheel size (outer diameter x thickness x inner diameter)				mm	Φ180x6-20xΦ31.75
	Spindle speed			50 Hz	rpm	2850
				60 Hz	rpm	3360
Motor	Spindle motor				hp	2
	Front and rear motor				hp	–
	Up and down motor				hp	–
	Hydraulic motor				hp	–
	Flush motor				hp	1/8
	Vacuum motor				hp	3/4
Size and weight	Machine height				mm.	1995
	Floor area (length x width)				mm.	1800x1200
	Machine weight (net weight / gross weight)				Kgs.	700/850

I want to place the order.

Name
TEL
Message
Code

previous：没有了

next：Taiwan original Jiande surface grinder KGS-200M / S original supply

Back