Technical parameters of QC12Y-6 × 3200 hydraulic pendulum shears

1. Maximum cutting thickness: 6mm
2. The maximum board width can be cut :3200mm
3. The sheared sheet strength: 450N / mm2
4. Cutting angle 1 ° 30 ′
5. Maximum backgauge distance :600mm
6. Number of strokes :14min-1
7. Distance between columns: 3420mm
8. The height of the table from the ground :800mm
9. Main motor power: 7.5kW
10. Machine dimensions (length × width × height):  3840 × 1675 × 1620 mm

3. Performance characteristics

1. Adopt steel plate welding structure, hydraulic transmission, nitrogen cylinder return, convenient operation, reliable performance and beautiful appearance.

2. The blade gap adjustment is indicated by a sign board, and the adjustment is light and rapid.

3. Equipped with lighting device, and can adjust the stroke of the upper knife holder steplessly. The working area adopts fence type personal safety protection device.

Fourth, the main machine tool configuration

1. Control system E10: Eston products
2. Main sealing ring, dust ring: Japan VALQUA company products
3. Main hydraulic components: American Omega products
4. Low noise internal gear pump: Shanghai Chengjie products
5. Blade: Shanghai Blade Factory products
6. Tubing connector: German JS card sleeve connector
7. Air switch: product of Siemens of Germany or product of Schneider of France
8. AC contactor: product of Siemens of Germany or product of Schneider of France
9. Thermal relay: product of Siemens of Germany or product of Schneider of France
10. Intermediate relay: Japan OMRON company products
11. Travel switch: French Schneider product

5. Working environment and conditions of use

This machine is suitable for any material preparation workshop, and its conditions are:
1. Ambient temperature: -10 ~ + 40 ℃ (the temperature of the fuel tank should not be lower than + 10 ℃)
2. Relative humidity: ≤80% (+ 25 ℃)
3. Power source: three-phase 380V ± 10% 50Hz

This machine has no "three wastes" discharged, and the noise limit meets the requirements of JB9969-1999.

6. Machine standard accessories

1．Move the foot switch     1

2．Front tray      1

3．Anchor bolt       4

4．Grease gun        1

5．Product operating instructions     1

6．Certificate of conformity       1

7．Packing List        1