TPR-1600H

Column diameter 432

The maximum distance from the center of the spindle to the surface of the machine column 1580

The minimum distance from the center of the spindle to the surface of the machine column 440

The spindle head moves horizontally on the arm 1140

Maximum distance from the end of the spindle to the machining surface of the base 1600

Minimum distance from the end of the spindle to the machining surface of the base 380

Swing arm vertical lifting stroke on the machine column 850

Box type table effective working range 700 × 500 × 400

Base size (LxWxH) 2480 × 1050 × 210

Spindle hole taper (Mohs number) MT # 5

Vertical travel of spindle 370

Spindle speed (return speed / fraction x number of segments) 40-1920 × 12 segments

Spindle feed rate (MM / rev x number of steps) 0.07 ~ 0.96 × 6 steps

Spindle drive motor horsepower 7 1 / 2HP

Arm lift motor horsepower 2 HP

Motor power of hydraulic clamping device 1 HP

Cooling pump motor horsepower 1/8 HP

Maximum distance from gearbox end to ground 3170

Height from the top of the column cap to the ground 2660 G

Net weight (approx.) 4600 kg

Gross weight after packing (approximately) 5100 kg

Packing size (length x width x height) 2850 × 1400 × 2940 3

Working capacity Drilling medium carbon steel 65Ø

Cast iron 70Ø

Tapping medium carbon steel 50Ø

Cast iron 60Ø