1．Nominal force：1000kN

2．Table length：3200mm

3．Distance between columns： 2700mm

4．Throat depth：320mm

5．Slider stroke： 200 mm

6．Maximum opening height between table and slider： 390mm

7．Slider stroke speed： No load：100mm/s  Working：10mm/s  Return trip：80mm/s

8．Main motor power：7.5kW

9．Machine dimensions (length × width × height):  3560×2200×2700  mm

This machine has a high labor productivity and a certain bending accuracy for bending metal sheets. When bending different thicknesses, different shapes or different sizes of materials should choose different shapes of upper mold or different opening size of V-groove lower mold.
The bending force is obtained from the material bending pressure gauge or the bending force calculation formula.
Due to the use of hydraulic transmission, it will not cause serious overload accidents caused by changes in sheet thickness or improper selection of the V-shaped groove of the lower die during work. In addition, the work is balanced, the mechanical noise is small, and it is particularly convenient, especially with the same rated pressure throughout the working stroke.
1. The electro-hydraulic proportional servo valve synchronization mechanism imported from Germany is adopted, with good synchronization accuracy and strong anti-eccentricity.
2. The frame is integrally welded with steel plates, the appearance is decent and standard, and it has sufficient strength and rigidity.
3. The upper die is equipped with oblique mode deflection compensation, and the lower die is equipped with hydraulic deflection compensation, so that there is no blind zone compensation, which can effectively compensate the deflection of the slider and the table and ensure the bending accuracy.
4. One set of standard upper and lower molds is provided at random (special molds can be provided according to the actual needs of users).
5. Choose our company's WE67K series of CNC bending machines, which can easily realize multi-machine linkage bending and be competent for the bending of ultra-long workpieces. One, yes). At that time, the two machine tools can be linked to process ultra-long workpieces, and the two machine tools can also work independently at the same time, greatly improving production efficiency.