1. The electro-hydraulic proportional servo valve synchronization mechanism imported from Germany is adopted, with good synchronization accuracy and strong anti-eccentricity.

2. The frame is integrally welded with steel plates, the appearance is decent and standard, and it has sufficient strength and rigidity.

3. The upper die is equipped with oblique mode deflection compensation, and the lower die is equipped with hydraulic deflection compensation, so that there is no blind zone compensation, which can effectively compensate the deflection of the slider and the table and ensure the bending accuracy.

4. One set of standard upper and lower molds is provided at random (special molds can be provided according to the actual needs of users).

http://xiezhongjx.com

http://lbyuanxin.1688.com

Technical description of bending machine

1．Nominal force：             6300  kN

2．Table length：             3200mm

3．Distance between columns：             2600 mm

4．Throat depth：               400  mm

5．Slider stroke：               320 mm

7．Maximum opening height between table and slider： 630 mm

8．Slider stroke speed：No load：60mm/s  working：6mm/s  Return trip：60mm/s

9．Main motor power：          37   kW

10．Dimensions (L × W × H)：3460×2515×4050   mm

This machine has a high labor productivity and a certain bending accuracy for bending metal sheets. When bending different thicknesses, different shapes or different sizes of materials should choose different shapes of upper mold or different opening size of V-groove lower mold.
Due to the use of hydraulic transmission, it will not cause serious overload accidents caused by changes in sheet thickness or improper selection of the V-shaped groove of the lower die during work. In addition, the work is balanced, the mechanical noise is small, and it is particularly convenient, especially with the same rated pressure throughout the working stroke.