Chinese
For the latest sawing machine prices, please contact us!
Taiwan Weiquan Metal Band Sawing Machine South China Sales Center
Hotline：400-8328-098
Hotline：0769-8287-9459
Fax number：0769-8902-6009
Technical Support：13631769379
After-sales service：13450028260
Sawing machine manufacturers：www.waytrain-cn.com
Grinding machine manufacturers：www.dgxiezhongjx.com
Milling machine manufacturers：www.xiezhongjx.com
Exhibition Hall Address: Four Alleys, Fudong, Liaobu Town, Dongguan
16th floor lobby
Guangdong Xiezhong Factory Direct Wholesale CNC Bending Machine，Our company newly introduced a batch of high precisionCNC bending machine，Manufacturers are holding promotional and promotional activities, welcome new and old customers online consultation and order!
1. Technical parameters
|
Technical specifications |
Unit |
XD-1030 |
|
|
Nominal power |
kN |
1000 |
|
|
Table length |
mm |
3000 |
|
|
Distance between columns |
mm |
2550 |
|
|
Throat depth |
mm |
400-410 |
|
|
Worktable (slider) stroke |
mm |
100-103 |
|
|
Maximum opening height |
mm |
370-375 |
|
|
Maximum die height |
mm |
250-255 |
|
|
|
Approach speed |
mm/s |
37-47 |
|
Travel speed of lower table |
Bending speed |
7.5-9.2 |
|
|
|
Return speed |
47-66 |
|
|
Number of cylinders |
个 |
3 |
|
|
main motor power |
kW |
7.5 |
|
|
Machine accuracy |
Slider repeat accuracy |
mm |
≤±0.01 |
|
Slider positioning accuracy |
mm |
≤±0.02 |
|
|
Repeat positioning accuracy of backgauge |
mm |
≤±0.02 |
|
|
Work straightness |
mm |
0.3/m |
|
|
Bending angle error |
° |
<±30 |
|
|
Machine weight |
kg |
6500 |
|
|
Machine dimensions (length * width * height) |
mm |
3410*1560*2300 |
|
|
Fuel tank capacity |
L |
70 |
|
2, the function introduction:
1. Adopting hydraulic down transmission, with safety, operability and reliability.
2. Rigid mechanical synchronization and rolling guides are used to maintain the balance between the upper and lower worktables.
3. The upper working table is equipped with oblique wedge type deflection compensation device to improve the processing accuracy.
4. Both the upper and lower dies adopt whole quenching, the upper die is a standard upper die, the lower die adopts a double-groove die, and the middle plate adopts a quick clamping device.
5. The back block foot has scale display, which is convenient to adjust, flexible and high precision.
6. The oil circuit of the hydraulic device is simplified, there is no oil leakage, maintenance and inspection are convenient.
7. A foot switch can be used to control the lower working table arbitrarily, or to stop in the middle, making it easy to bend the line.
8. The control system adopts a professional numerical control system NC9 or NC10, with a touch-type wire-controlled steering wheel, electronic hand wheel control for fine adjustment of upper and lower die openings and fine adjustment of back gauge.
3、Product characteristics：
|
Serial number |
Main features |
Introduction |
|
1 |
Pressure device |
The circuit of the hydraulic system is very simplified, it avoids the occurrence of oil leakage, and it is also very convenient to maintain and maintain. |
|
2 |
Hydraulic master cylinder |
The hydraulic master cylinder is installed at the center axis of the machine table, and the difference in the skew rate between the upper and lower machine tables (table tops) during pressurization is suppressed to a minimum, so the machining accuracy is high. |
|
3 |
Lower table |
The central axis of the lower machine is equipped with a roller guide accessory. This roller guide accessory has a strong sliding surface and moves up and down along the two sides of the hydraulic master cylinder, so the parallelism of the upper and lower tables can be correctly maintained. |
|
4 |
Lower limit device |
The lower limit device is a device to improve work efficiency, and the stroke of the lower table can be simply set to the necessary minimum. Secondly, the bending angle of the workpiece can be easily changed with the turntable operation without stages, and it also has an upper limit device. |
|
5 |
Foot lever |
According to the increase or decrease of stepping on the foot lever, the speed of the lower table can be controlled arbitrarily, or stop in the middle to facilitate the bending of the line. |
|
6 |
Mold installation and center calibration |
The middle plate of the upper table and the lower mold base of the lower table can be used for simple mold installation and center correction. |
|
7 |
CNC operation |
Professional touch screen with electronic handwheel control and product programming, simple and fast. |
4、Product advantages and disadvantages
|
Serial number |
Compare content |
Remarks |
||
|
1 |
Transfer method |
Down drive |
The oil cylinder is at the bottom (one main oil cylinder in the middle, one auxiliary oil cylinder on each side, three oil cylinders in total) |
It is better to ensure the straightness and angle of the workpiece and easy maintenance. |
|
Upload |
The oil cylinder is in the upper part (two oil cylinders are located on both sides of the machine) |
Inconvenient maintenance |
||
|
2 |
Hydraulic way |
Down drive |
One direction (upward) |
The fault is low and the balance point rests on the mechanical stop. |
|
Upload |
Two directions (up and down) |
The balance point should be jittery and the failure rate is high. |
||
|
3 |
Mechanical installation |
Down drive |
No foundation |
Save time and reduce costs |
|
Upload |
Make a foundation |
|
||
|
4 |
Working desk |
Down drive |
narrow |
Adapt to multi-angle bending
|
5，Machine tool main configuration
|
Serial number |
Main configuration |
Manufacturer |
Remarks |
|
1 |
Oil pump |
Voith Germany or NACHI |
|
|
2 |
Seals |
Japan NOK Corporation |
|
|
3 |
Tubing (high pressure hose) |
Made in Taiwan |
|
|
4 |
valve |
Made in China |
|
|
5 |
Rear block assembly |
Made in China |
|
|
6 |
CNC system (including electrical box) |
NC9 touch screen professional CNC system |
|
|
7 |
Servo motor |
Mitsubishi, Panasonic |
next：没有了
