Features of 100-ton Bending Machine:
1. Adopt the latest TFT color liquid crystal touch operation panel, the picture is bright, the data input adopts the dialogue mode, input directly from the data, or input through the remote control handwheel, the operation is simple.
2. Optimized NC controller and large memory capacity device. (Maximum 60 programs can be memorized, one program can memorize 99 steps at most / the same step can be repeated up to 9 times)
3. L-axis automatic post-positioning control and D-axis depth control are combined into one to achieve the perfect state.
4. The operation is easy to use, so the training time is short, the processing speed is improved, and the maintenance is simple.
Back-pulling and folding function: During the bending process, the baffle will not prevent the material from being clamped, and the rear baffle has a retreat function.
Slow bending speed function: when processing bending, the function of setting a safe bending speed according to the operation.
Slow fold position, pause function: the most effective for bending boxes, etc., the function of setting the stop position and waiting time of the table during the process of bending.
Quick clamping of the middle plate: during the clamping of the mold with the anti-drop groove on the mold handle on the middle plate, only the red handle needs to be pulled left and right to quickly load and unload the mold.